Sintering process:
Cold pressing sintering: After mixing diamond particles with metal powder evenly, they are formed by cold pressing and then sintered at high temperature. This process is simple and cost-effective, but the distribution of diamond particles may be uneven, affecting cutting performance.
Hot pressing sintering: Pressing and sintering at high temperature and high pressure to make the diamond particles more tightly bonded to the metal matrix, resulting in better cutting performance. This process is complex and costly, but it is suitable for situations that require high cutting accuracy and efficiency.
Electroplating process:
Attach diamond particles to the substrate through electroplating to form a thin diamond cutting layer. This process has low cost and high production efficiency, and is suitable for manufacturing thinner cutting pieces. However, due to pollution issues, the production of electroplated diamond products has been gradually cancelled.
Electroplated diamond cutting blades: diamond particles are attached to the substrate by electroplating method (currently less widely used).
Classified by purpose:
Stone cutting saw blade: used for cutting and slicing various natural marble, granite, and artificial stones.
Optical cutting saw blade: used for cutting, slicing, slotting, etc. of optical glass, crystals, etc.
Semiconductor cutting saw blade: used for cutting semiconductor materials such as silicon, germanium, etc.
Engineering cutting saw blade: used for cutting and grooving concrete workpieces, as well as dismantling and renovating reinforced concrete buildings.
Ceramic cutting saw blade: used for cutting various ceramic materials.

Outer diameter	Abrasive thickness	Body thickness	Abrasive width	Aperture	Resin part No.		Metal part No.
ØD (mm)	T (mm)	E (mm)	X (mm)	H* (mm)	Diamond	CBN	Diamond
76.2	0.8	0.5	63.5	12.7	10760812	12076081	13076081
76.2	1.0	0.7	63.5	12.7	10761012	12076101	13076101
101.6	0.8	0.5	63.5	12.7/32	11010832	12101083	13101083
101.6	1.0	0.7	63.5	12.7/32	11010832	12101103	13101103
101.6	1.2	0.9	63.5	12.7/32	11011232	12101123	13101123
127.0	0.8	0.5	63.5	12.7/32	11270832	12127083	13127083
127.0	1.0	0.7	63.5	12.7/32	11271032	12127103	13127103
127.0	1.2	0.9	63.5	12.7/32	11271232	12127123	13127123
152.4	0.8	0.5	63.5	12.7/32	11520832	12152083	13152083
152.4	1.0	0.7	63.5	12.7/32	11521032	12153103	13153103
152.4	1.2	0.9	63.5	12.7/32	11521232	12151123	13151123
177.8	0.8	0.5	63.5	12.7/32	11780832	12128083	13128083
177.8	1.0	0.7	63.5	12.7/32	11781032	12128103	13128103
177.8	1.2	0.9	63.5	12.7/32	11781232	12128123	13128123
203.2	0.8	0.5	63.5	12.7/32	12030832	12203083	13203083
203.2	1.0	0.7	63.5	12.7/32	12031032	12203103	13203103
203.2	1.2	0.9	63.5	12.7/32	12031232	12203123	13203123
203.2	1.6	1.2	63.5	12.7/32	12031632	12203163	13203163
254.0	1.2	0.9	63.5	12.7/32	12541232	12254123	13254123
254.0	1.6	1.2	63.5	12.7/32	12541632	12254163	13254163
304.8	1.2	0.9	63.5	12.7/32	13051232	12305123	13305123
304.8	1.6	1.2	63.5	12.7/32	13051632	12305163	13305163