Operating environment: Maintain good ventilation, avoid prolonged skin contact, and prevent inhalation of harmful gases or skin allergies.
Storage conditions: Store in a cool and dry place, away from direct sunlight and high temperature environment, to prevent lubricant from deteriorating or evaporating.
Safety protection: Wear gloves and goggles during operation, avoid direct contact of lubricating fluid with eyes and skin, and prevent chemical irritation or burns.
Dilution ratio: According to the product instructions, mix the lubricant with water in proportion (usually 1:15 to 1:20) to ensure even dilution and avoid excessive or insufficient concentration affecting the effectiveness of use.
Equipment addition: Add diluted lubricant to the cooling water tank of the equipment to ensure cleanliness during the addition process and avoid impurities from entering.
Start the equipment: After starting the equipment, ensure that the lubricant is evenly sprayed on the processing area to avoid local overheating or insufficient lubrication.
Regular replacement: According to the frequency of use and degree of pollution, regularly replace the lubricant to prevent it from deteriorating and affecting the processing quality or damaging the equipment.
Packaging and specifications: Lubricants are usually packaged in barrels, with specifications including 1L, 2L, 5L, 6L, etc. Choose the appropriate specifications according to actual needs to avoid waste.
Antifreeze measures: In cold regions, pay attention to preventing lubricants from freezing, especially water-based lubricants. Freezing may affect the effectiveness of use, and insulation measures should be taken.
Fire safety: Lubricants may contain flammable components. Keep away from sources of fire when using to prevent fire accidents.
Compatibility testing: Conduct compatibility testing in advance when replacing lubricants or mixing with other chemicals to prevent chemical reactions from affecting the effectiveness of use or damaging equipment.
Cleaning and maintenance: Regularly clean the chips, oil sludge, and sludge in the equipment, keep the lubrication system clean, and prevent impurities from affecting the lubrication effect.